Process Equipment

CDB PROCESS EQUIPMENT are tailor-made solutions for the Oil & Gas, Chemical, Petro-Chemical and Water Treatment Process Industry. Covering upstream to downstream applications, CDB PROCESS EQUIPMENT are fully engineered by our project team with the most reputed and reliable engineering software available on the market. Moreover, our full control of the in-house fabrication phases guarantees timely deliveries at the highest quality standards.

Cartridge Filters

Cartridge filter elements are the most suitable solutions for filtration efficiencies up to 0.1 microns. CDB offers a wide range of solution for filtration solid-liquid, solid-gas and also coalescing type for removal of liquid from gas. Either disposable or reusable elements, the material of construction are selected depending on operating conditions, fluid type and nature of contaminants.

Activated Carbon Filters

Not all the contaminants can be removed mechanically. Activated Carbon are used for the specific removal of contaminants exploiting their absorbing power. CDB can offer solutions for a wide range of applications including removal of VOCs, H2S, Oil, Condensate Treatment, Vapor/Odour Treatment.

Bag Filters

The dust removal in air/gas feed is very important for the quality of the final product. The dust particles are clogged to the surface of the bag creating a layer/cake which is timely removed by pulse generation. Filtered feed, compressed air or nitrogen are normally used to remove the dust on the external surface of the bags, collecting the contaminants thanks to the smooth surfaces of the lower hopper.

Self-Cleaning Filters

Self-cleaning filters are the solution to operate continuously also with high TSS values in the feed. CDB has developed an outstanding experience to enhance filter elements durability, lower discharge of backwash fluid with limited pressure drop. The performance of our range of automatic filters allow to reduce deeply the maintenance cost and provide a sensational cost effective solution.

Three Phase Separators

The ability to differentiate the Gas phase, Light Liquid and Heavy Liquid Phases is fundamental for the primary separation in upstream and test facilities. CDB design and manufacture all the different section of the separators to meet the required performance. Upon request, CDB delivers the entire unit with instrumentation and valves for a direct use on the field.